This is a high -performance 4 ports UHF RFID tag reader integrated with Impinj E710 reader chip supporting Gen2X. It is completely independent of the intellectual property design. Combined with the proprietary high -efficiency signal processing algorithm, while maintaining a high -degree reading rate, it realizes the rapid reading and writing processing of electronic labels It can be widely used in a variety of wireless radio frequency recognition (RFID) systems such as logistics, access control systems, anti -counterfeiting systems and production processes control.
Features:
1, With own independent intellectual property design;
2, Working frequency 840 ~ 960MHz;
3, Based on the design of the read and write engine, RFID tag that fully supports the EPC Class1 G2 standard;
4, Working with a wide range of frequency or frequency transmission, support RSSI function, peak label inspection speed is greater than 700 pieces/s;
5, The output power reaches 33dbm (adjustable);
6, Support 4 external TNC antenna interfaces, support antenna automatic fine -tuning and antenna detection;
7, Support the response work mode and real -time inspection working mode;
8, Label cache capacity: 1,000 pieces@ 96bitSepc;
9, Support the four anti -conflict modes: EPC, TID, User, EPC+TID;
10, Low -power design, single + 12V power supply power supply, optional POE power supply method;
11,Support RS232, RJ45 (TCP/IP), WIFI (options), 4G (options), POE (optional) and other communication interfaces; POE (optional);
12, Optional 2 -channel input control (5V signal), select 2 output control (5V signal), select 2 -way relay control;
13, Provide dynamic connection library (DLL) and demonstration software source code to support secondary development;
14, Exquisite small design meets the needs of various applications.
Electrical
Extreme parameters
|
Item |
Mark |
Value |
Unit |
|
Voltage |
VCC |
28 |
V |
|
Operating temperature |
TOPR |
-20～+55 |
℃ |
|
Storage temperature |
TSTR |
-40～+85 |
℃ |
Specification
Except for special explanations, the specifications shown are taken from TA = 25 ° C and VCC =+9V working conditions
|
ITEM |
Mark |
Minimum |
Typical |
Maximum |
Unit |
|
Voltage |
VCC |
8 |
12 |
28 |
V |
|
Working current |
IC |
|
1.2 |
2 |
A |
|
working frequency |
FREQ |
840 |
860~868 902~928 |
960 |
MHz |
|
Size |
L x W x H |
|
235 x155 x35 |
|
mm |
Interface
1．Power supply DC JACK
|
Serial number |
Mark |
Description |
|
Central |
PWR |
Positive 12V power supply |
|
Outer |
GND |
GND |
|
Serial number |
Mark |
Description |
|
1 |
TXD |
Serial communication data output |
|
2 |
RXD |
Serial communication data input |
|
3 |
GND |
Signal GND |
